Account

B2C Registration

B2B Registration

TEST OF FLEXING WITH LOAD

Against the tendency of the main producers, Extrema Ratio does not consider as peculiar characteristic the flexibility grade but bearing loads with minimum possible deformation. Tests carried out inside the company enable to confirm the product structural limits. The test of flexing with load is carried out placing the bayonet on a mobile surface and an elecronic dynamometer on a fixed support. While fixing the bayonet tangle to the dynamometer and going slowly down, the bayonet will be flexed. We can so evaluate the applied load and the moving of the flexed part from the fixing surface. This test destroys the bayonet and the dynamometer registers the maximum pick load when the bayonet breaks.

Bayonet fixed at one third of the blade

Blade breaking load fixed at 1/3 with traction point on the tangle: 106 kg – 233 lb

Bayonet fixed at two thirds of the blade

Blade breaking load fixed at 2/3 with traction point on the tangle: 155 Kg – 341 lb

Bayonet fixed at three thirds of the blade

Blade breaking load fixed at 3/3 with traction point on the tangle: 259 kg – 570 lb

TEST RESULT

ISCRIVITI ALLA NEWSLETTER

Quando invii il modulo, controlla la tua inbox per confermare l'iscrizione

Leggi.

Riceverai tutte le novità di Extrema Ratio!

SUBSCRIBE TO THE NEWSLETTER

Read.

You will receive all the Extrema Ratio News!